36
KX-TG9471B/KX-TG9472B/KX-TGA939T
9.1.4.3. Check Table for RF part
Note:
(*1) Refer to Registering a Portable to the Base Unit (P.18)
(*2) Refer to RF-BBIC Interface Signal Wave Form (P.37)
(*3) Refer to Adjustment Standard (Base Unit) (P.58)
(*4) Refer to Adjustment Standard (Portable) (P.62)
No. Item BU (Base Unit) Check P (Portable) Check
1 Link Confirmation Normal 1. Register Regular P to BU (to be checked).
(*1)
2. Press [Talk] key of the Regular HS to
establish link.
1. Register P (to be checked) to Regular BU.
(*1)
2. Press [Talk] key of the P to establish link.
2 Control signal confirmation 1. Check BBIC interface. (*2) 1. Check BBIC interface. (*2)
3 X’tal Frequency confirmation 1. Check X’tal Frequency. (*3)
(10.368 MHz ± 100 Hz)
1. Check X’tal Frequency. (*4)
(10.368 MHz ±100 Hz)
4 Range Confirmation Normal 1. Register Regular P to BU (to be checked).
(*1)
2. Press [Talk] key of the Regular P to estab-
lish link.
3. Compare the range of the BU (being
checked) with that of the Regular BU.
1. Register P (to be checked) to Regular BU.
(*1)
2. Press [Talk] key of the P to establish link.
3. Compare the range of the P (being
checked) with that of the Regular P.
To Next Page
Loading...
