To Next PageTo Next PageWhat to do if Panasonic Telephone batteries still flash after charging?
If your Panasonic Telephone batteries still flash, display a battery icon, or have a shorter operating time even after being fully charged, clean the battery ends and charge contacts with a dry cloth and charge again. If the problem persists, it may be time to replace the batteries.
How to fix no dial tone on my Panasonic Telephone?
If you cannot hear a dial tone on your Panasonic Telephone, ensure that the CELL indicator is lit. Check that the base unit’s AC adapter or telephone line cord is properly connected. Disconnect the base unit from the telephone line and connect the line to a known working telephone.
Why is my Panasonic Telephone not recording messages?
If your Panasonic Telephone is not recording new messages, ensure the answering system is turned on. Note that the system does not record calls from cellular lines. Check if the message memory is full and erase unnecessary messages if needed. Also, verify the greeting setting is not set to “Greeting only” or “Greeting1&Only”. If you subscribe to a voice mail service, messages may be recorded by your provider instead of the telephone. The answering system can only record calls from 1 line at a time.
Why is my Panasonic Telephone not ringing?
If your Panasonic Telephone handset or base unit isn't ringing, check the following: Ensure the ringer volume for both landline and cellular line is not turned off. Also, if one handset is selected to ring for cellular calls, other units will not ring. Finally, ensure that silent mode is turned off.
Why is my Panasonic Telephone handset beeping and flashing?
If your Panasonic Telephone handset is beeping and/or flashing, it likely indicates that the battery charge is low. Fully charge the batteries to resolve this issue.
General| Number of Handsets | 1 |
|---|---|
| Answering System | Yes |
| Answering System Recording Time | 18 minutes |
| Caller ID | Yes |
| Call Waiting Caller ID | Yes |
| Speakerphone | Yes |
| Display | LCD |
| Expandable Handsets | Yes |
| DECT 6.0 Technology | Yes |
| Bluetooth | No |
| Intercom | Yes |
| Battery Life (Talk Time) | Up to 10 hours |
| Battery Life (Standby) | Up to 7 days |
| Frequency | 1.9 GHz |
| Caller ID Memory | 50 |
| Phonebook Capacity | 100 |
Crucial safety warnings regarding power, installation, and usage.
Notes on installation, location, and battery handling precautions.
Detailed safety precautions to prevent fire, shock, and injury.
Instructions for connecting the AC adaptor and telephone line cord.
Details for single-line, DSL/ADSL, and 2-line setups.
Steps for installing and charging Ni-MH batteries.
Overview of the feature for connecting cellular phones.
Step-by-step guide to pair a cellular phone via Bluetooth.
Options for selecting which unit rings for cellular calls.
Auto connection interval and manual connection/disconnection.
How to set or change the Bluetooth pairing PIN.
Moving cellular calls between handset and phone.
Steps to make calls using a cellular line from the base unit.
Steps to make calls using the landline from the base unit.
How to answer calls on the base unit.
Moving cellular calls between base and phone.
Explains how intercom calls function between units.
Steps to initiate an intercom call.
Introduction to storing contacts, including limits and groups.
Step-by-step guide to add new contacts to the phonebook.
How to locate and make calls from saved contacts.
Procedures for modifying existing contact details.
Detailed steps for editing contact information.
Information on storing and using speed dial numbers.
Assigning phone numbers to speed dial keys.
Lists programmable features, codes, and page references.
Settings for managing Bluetooth devices like phones and headsets.
Features for blocking unwanted calls.
Prerequisites and features of the Caller ID service.
How caller information is displayed and logged.
Accessing call history and returning calls.
Transferring contacts from a cell phone to the unit.
Notifying users of incoming text messages from a cellular phone.
Pairing and using a Bluetooth headset for calls.
Introduction to the unit's answering system features.
Basic controls for activating or deactivating the system.
Step-by-step instructions for recording a personal greeting.
Accessing recorded messages via the base unit.
Accessing recorded messages via the handset.
Controls for accessing messages remotely.
Overview of how to operate the system remotely.
Lists common error messages and their solutions.
General troubleshooting steps and common issues for the unit.
Continues troubleshooting tips for calls and connectivity.
Details of the product's limited warranty coverage.
Quick troubleshooting steps and website resource pointer.
