46
KX-TG9333PK/KX-TG9334PK/KX-TGA931T
8.1.6. Test Link Mode for Handset
Note:
(*1) LCD displays the Channel number.
(exception: default/ CH00 = 0ch.)
(*2) If can not proceed to the next step, refer to Registering a Handset to a Base Unit (P.56).
(*3) for factory use only.
(*4) Refer to Check Table for RF part (P.58).
(*5) Operation for regular base unit. Refer to CHART1 in the TEST RANGE Check (P.59).
To Next Page
Loading...
