To Next PageTo Next PageHow to turn on Panasonic KX-TGD320AL handset?
If the Panasonic Answering Machine handset does not turn on even after installing charged batteries, place the handset on the base unit or charger to turn on the handset.
How to fix Panasonic KX-TGD320AL not recording messages?
If your Panasonic Answering Machine is not recording new messages, ensure the answering system is turned on. Also, check if the message memory is full and erase any unwanted messages. Verify that the recording time is not set to “Greeting Only”, and adjust the setting if needed. Ensure that other devices, such as handsets, are not engaged in a call, as the answering system will not answer incoming calls during that time. Finally, your phone service provider’s voicemail service may be answering calls before the unit; in this case, change the unit’s number of rings setting to a lower value.
Why is remote access not working on my Panasonic Answering Machine?
If you cannot operate the answering system remotely on your Panasonic Answering Machine, ensure that the remote access code is set. If you are entering the wrong code, check your current code in the remote access code setting. Also, verify that the answering system is turned on.
Why is my Panasonic KX-TGD320AL Answering Machine handset beeping and flashing?
If the handset of your Panasonic Answering Machine beeps and/or flashes, it indicates that the battery charge is low. Fully charge the batteries.
Why can't I hear a dial tone on my Panasonic KX-TGD320AL?
If you cannot hear a dial tone on your Panasonic Answering Machine, make sure that you are using the supplied telephone line cord because your old telephone line cord may have a different wiring configuration. Check that the base unit’s AC adaptor or telephone line cord is connected properly. Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider.
Why is my Panasonic Answering Machine base unit beeping?
If your Panasonic Answering Machine base unit beeps, it indicates that new messages have been recorded. You should listen to the new messages.
What to do if Panasonic KX-TGD320AL handset display is blank?
If the Panasonic Answering Machine handset display is blank, the handset is not turned on. Turn the power on.
Why is my Panasonic Answering Machine handset not ringing?
If the handset of your Panasonic Answering Machine does not ring, the ringer volume may be turned off. Adjust the ringer volume. Also, 'Do not disturb' mode may be turned on, so turn it off.
What to do if my Panasonic KX-TGD320AL Answering Machine does not record new messages?
If your Panasonic Answering Machine does not record new messages, make sure the answering system is turned on. Also, the message memory might be full, so erase unwanted messages. Check if the recording time is set to 'Greeting Only' and change the setting if needed. Your phone service provider’s voicemail service may be answering calls before the unit, so change the unit’s number of rings setting to a lower value, or contact your phone service provider. The answering system will not answer incoming calls while other devices such as handsets are engaged in a call.
Why can't I make a call on my Panasonic KX-TGD320AL?
If you cannot make a call on your Panasonic Answering Machine, you may have dialled a call restricted number. The key lock feature may be turned on, so turn it off. Also, the unit is not designed to be used with rotary/pulse dialling services.
General| Type | Cordless Phone |
|---|---|
| Number of Handsets | 1 |
| Expandable up to | 6 Handsets |
| Caller ID | Yes |
| Call Waiting Caller ID | Yes |
| Call Block | Yes |
| Speakerphone | Yes |
| Intercom | Yes |
| DECT Technology | Yes |
| Frequency | 1.9 GHz |
| Battery Type | Ni-MH |
| Display | LCD |
| Keypad on Base | Yes |
| Answering System | Digital |
| Phonebook Capacity | 100 |
| Range | 50 m (Indoor) / 300 m (Outdoor) |
Details the product models and their components.
Lists supplied accessories with part numbers and quantities.
Information on adding optional handsets to extend system range.
Safety precautions for preventing injury and property loss.
Precautions for safe operation and maintenance of the product.
Information on battery types, handling, and charging.
Essential safety precautions to reduce risks during use.
Technical specifications of the digital cordless answering system.
Step-by-step guide for connecting the base unit and charger.
Instructions for charging the handset batteries.
Identifies controls on the handset and base unit.
Explains the meaning of various icons shown on the handset display.
Instructions on how to switch the unit on and off.
Steps to set the unit's date and time.
How to change the display language of the unit.
Information and settings for the power-saving Eco Mode.
Procedures for placing, receiving, and ending calls.
Details on Hold, Mute, Recall/Flash, and Equalizer.
How to use intercom and transfer/conference calls.
How the unit functions during a power failure.
Adding, storing, editing, and deleting phonebook contacts.
Assigning phone numbers to speed dial keys for quick access.
Accessing features via menus or direct command codes.
Configuring ringers, DND, alarms, call blocking, and display.
Setting up Key Finder, Eco Mode, Security, and Repeater.
Adding and managing handsets and base units.
How caller information is displayed and logged.
Important notes and viewing the caller list.
Setting up greetings, recording, and turning system on/off.
Playing, erasing, and navigating through recorded messages.
Alerting, remote access, and call back features.
Configuring call screening, recording time, and greeting options.
Information on phone service provider voicemail features.
Using dial keys to enter text and numbers.
Lists common display messages and their causes/solutions.
Solutions for common problems with the unit.
