Mute
Handset
1 P
ress MMUTEN during a call.
2 To return to the call, press MMUTEN.
Base unit
1 P
ress MMUTEN during a call.
R When the speakerphone is used, the
SP-PHONE indicator flashes.
2 To return to the call, press MMUTEN.
Note for handset:
R MMUTEN is a soft key visible on the display
during a call.
Flash
Handset / Base unit
MF
LASHN allows you to use the special features of
your host PBX such as transferring an extension
call, or accessing optional telephone services.
Note:
R To change the flash time, see page 43.
For call waiting or Call Waiting Caller
I
D service users
To use call waiting or Call Waiting Caller ID, you
must first subscribe with your phone service
provider.
This feature allows you to receive calls while you
are already talking on the phone. If you receive a
call while on the phone, you will hear a call waiting
tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd caller’s
information is displayed on the unit that is in use
after you hear the call waiting tone.
Handset / Base unit
1 P
ress MCALL WAITN to answer the 2nd call.
2 To switch between calls, press MCALL WAITN.
Note:
R Please contact your phone service provider for
details and availability of this service in your
area.
Temporary tone dialing (for rotary/
p
ulse service users)
Handset / Base unit
P
ress * before entering access numbers which
require tone dialing.
Handset noise reduction
T
his feature allows you to hear the voice of the
person you are talking to more clearly, by reducing
the surrounding noise coming from the other
party’s telephone.
1 Press MMENUN while talking.
2 MbN: “Noise reduction on” or “Noise
reduction off” a MSELECTN
Note:
R Depending on the environment where this
handset is being used, this feature may not be
effective.
R This feature is not available while using the
speakerphone and Bluetooth headphone.
Handset equalizer
T
his feature clarifies the voice of the person you
are talking to, producing a more natural-sounding
voice that is easier to hear and understand.
1 Press MMENUN while talking.
2 MbN: “Equalizer” a MSELECTN
3 MbN: Select the desired setting.
4 Press MOKN to exit.
Note:
R Depending on the condition and quality of your
telephone line, this feature may emphasize
existing line noise. If it becomes difficult to hear,
select another setting.
R This feature is not available while using the
speakerphone and Bluetooth headphone.
R When both the “Equalizer” setting and noise
reduction are activated,
is shown on the
d
isplay.
22
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls
To Next Page
Loading...
