Y
Programming using the Handset
29
Document Version 2010-08
*1 If you program these settings using one of the handsets, you do not need to program the same item
using another unit.
*2 If you want to view the caller’s information after lifting up the handset to answer a call, turn off this
feature.
*3 We recommend programming this setting with your administrator. Contact your administrator for
further information.
*4 This tone lets you know when you receive an outside call while you are on the other outside call or an
intercom call.
*5 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys,
including confirmation tones and error tones.
*6 When the ringer volume is turned off, ~ is displayed and the handset does not ring for outside calls.
However even when the ringer volume is set to off, the handset rings at the lowest level for intercom
calls (page 46, 47) and paging (page 48).
Embedded Web {5}{3}{4}{1}: On
{0}: <Off>
–41
Handset Name {1}{0}{4} ––32
Intercom Call {2}{7}{4} – – 46, 47
Interrupt tone
*4
{2}{0}{1}{1}: <On>
{0}: Off
– 15, 46,
47
IP Settings
*3
{5}{0}{1} – r –
Keytones
*5
{1}{6}{5}{1}: <On>
{0}: Off
––
LCD Contrast
(Display contrast)
{1}{4}{5}{1} – {6}: Level 1–6 <3> – –
New Msg. Alert
(Msg.: message)
{3}{4}{0}{1}: On
{0}: <Off>
–45
Phonebook {2}{8}{0} ––21
Register H.set
(H.set: handset)
{1}{3}{0} ––42
Ringtone {1}{6}{1} (Line 1: 8
max.)
{1} – {9}:
Ringtone <1>–9
––
Ringer Volume
*6
{1}{6}{0}{1} – {6}: Level 1–<6>
{0}: Off
–14
Set Date/Time {1}{0}{1} – r 32
Software version {1}{5}{6} – r 33
New Voice Mail {3}{3}{0} ––45
Feature Feature
code
Setting code System
setting
*1
Page
To Next Page
Loading...
