Panasonic KX-TSC10FXW - LCD Contrast; Ringer Volume

11
Preparation
LCD Contrast
You can select the LCD contrast level from 1 to 4 by programming. Your
phone comes from the factory set to 2.
Make sure that the handset is on the cradle.
1
Press [FUNCTION/EXIT] .
2
Scroll to “ LCD CONTRAST ? ” by
pressing [] or [] .
3
Press [ENTER] .
• The current setting is displayed.
4
Select the desired contrast by pressing
[] or [] .
• Each time you press [] or [] , the LCD
contrast will change.
5
Press [ENTER] .
• The display will return to step 2.
To exit the programming mode,
press [FUNCTION/EXIT] or wait for
60 seconds.
• You can exit the programming mode any time by pressing [FUNCTION/EXIT] .
Ringer Volume
You can select the ringer volume to HIGH, LOW or OFF. Your phone comes
from the factory set to HIGH.
LCD CONTRAST ?
<
<
<
<
<
<
STORED
LOW
OFF
HIGH
RINGER
RINGER Selector:
Set to HIGH, LOW or
OFF.
≥When set to OFF,
the unit will not ring.