30
This unit can be mounted on a wall.
1
Press the tabs in the
direction of the arrows
( ), then remove the wall
mounting adaptor ( ).
2
Tuck the telephone line
cord inside the wall mounting
adaptor, and push it in the
direction of the arrow ( and
).
• The word “UP WALL” should face
upward.
3
Install screws using the wall
template below. Connect the
telephone line cord. Mount the
unit, and slide down.
4
Adjust the LCD contrast level for
best view (p. 11).
Wall Template
2
1
1
1
2
1
2
1
2
8.3 cm
To Single-Line
Telephone Jack
Screws
To temporarily set the handset down
during a conversation, place it as shown
here.
Wall Mounting
8.3 cm
To Next Page
Loading...
