Panasonic KX-TSC10FXW - Call Restriction

29
Advanced Operation
Call Restriction
You can prevent the unit from dialing phone numbers beginning with
specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted
leading digits cannot be dialed out.
To set the call restriction
Make sure that the handset is on the cradle.
1
Press [FUNCTION/EXIT] .
2
Scroll to “ CALL RESTRICT ? ” by
pressing [] or [] .
3
Press [ENTER] .
If you changed the password
“1111” (factory set), the display on
the right will be shown. Follow
below steps 1 and 2.
1. Enter the password (p. 27).
2. Press [ENTER] . Go to step 4.
• If the wrong password was entered,
“ ERROR ” will be displayed, then “– – – –”
will be displayed. Enter the correct
password.
4
Enter the number(s) (1 digit or 2
digits) you want to restrict ( [0] to [9] ).
• If the wrong number was entered, press
[CLEAR] and enter the correct number.
5
Press [ENTER] .
• The display will return to step 2. To exit
the programming mode, press
[FUNCTION/EXIT] or wait for
60 seconds.
To cancel the call restriction
Follow steps 1 through 3. In step 4, press [CLEAR] to clear the restricted
digits, and press [ENTER] .
When dialing a phone number with the restricted leading digit(s), “ CALL
RESTRICTED ” is displayed.
CALL RESTRICT ?
<
<
RESTRICT NO.:––
ENTER PASSWORD
:
RESTRICT NO.:–9
STORED