14
• Caller information will not be displayed in the following cases:
—If the caller dialed from an area which does not provide a Caller ID service, the
display will show “
OUT OF AREA
”.
—If the caller has requested not to display his/her information, the display will
show “
PRIVATE CALLER
”.
—If a long distance call is identified and caller’s name and/or number cannot be
received, the display will show “
LONG DISTANCE
”.
• If your unit is connected to a PBX which does not support Caller ID services, you
cannot access those services.
Using the Caller List
If you have received 10 new calls, the
number of new calls will be displayed as
shown, while the unit is not in use.
Viewing the Caller List
To check who has called, follow the steps below.
1
Press
[]
or
[]
to enter the Caller
List.
2
To search from the most recent call,
press
[]
.
• To search from the oldest call, press
[]
.
• To scroll between callers, press
[]
or
[]
.
3
To exit the Caller List, press
[FUNCTION/EXIT]
.
• If “
NO ITEMS STORED
” is displayed, the Caller List is empty.
• If more than one call is received from the same caller, the date and time of the
most recent call will be recorded.
• If the batteries installed in the unit have expired, Caller ID services will not be
available.
• If the name and the time/date display service is available in your area, the
display will show caller’s names and the time/date the calls were received. For
further information, please contact your telephone company.
10 NEW CALLS
12:34
PM
24/11
/
1114447777
11:50
AM
24/11
NEW
<
<
<
<
<
<
Caller ID Service
To Next Page
Loading...
