5
Preparation
(This display shows all of the possible
configurations.)
While the unit is not in use, the display
shows the current time and date, and the
number of new calls.
If the display continuously shows “
12:00
AM
1/1
” or “
0:00 1/1
”, the clock needs
adjustment (p. 8, 9).
During a conversation, the display shows
the length of the call (Ex. 1 hour, 6 minutes
and 35 seconds).
This is a display from the Caller List. The
display shows:
— the caller’s number,
— the time and date of the last call
(Ex. Nov. 24, 11:50 AM),
— the caller’s information is new and has
not been viewed (“
NEW
” is displayed),
and
— the number of times called (Ex. 3 times).
: The dial lock mode is set (p. 28).
: The unit enters in the Speed Dial List (p. 19).
:
[REDIAL/PAUSE]
was pressed while the handset is on the cradle
(p. 12).
: This display flashes when the battery power is low. Replace the
batteries (p. 31).
:
[REDIAL/PAUSE]
was pressed while dialing or storing phone
numbers.
:
[FLASH]
was pressed while storing phone numbers.
1234567890123456
10 NEW CALLS
12:34
AM
24/11
/
NO ITEMS STORED
12:00
AM
1/1
01-06-35
12:34
AM
24/11
//
1114447777
11:50
AM
24/11
NEW x3
P
F
Display
To Next Page
Loading...
