23
Advanced Operation
Editing
Make sure that the handset is on the cradle.
1
Press
[]
or
[]
to enter the Speed
Dial List.
2
Scroll to the Speed Dial item you want
to change by using
[]
or
[]
.
• You can get an item by using the memory
station number (01 to 50) directly.
3
Press
[]
or
[ENTER]
.
If there is no name information for
the caller, “
ENTER NAME
” will be
displayed.
a)If a name is required, enter a name
(p. 21), and go to step 4.
b) If a name is not required, go to step 4.
If there is name information for the
caller,
edit the name using the dialing buttons
(p. 21).
• To clear an incorrect character, move the
cursor to the character by using
[]
or
[]
, then press
[CLEAR].
4
Press
[ENTER]
.
5
Add a number to the current number.
• Each time you press
[CLEAR]
, a digit is
erased.
• To move the cursor, press
[]
or
[]
.
6
After editing, to continue with storing
procedures, repeat steps 6 to 7 on
pages 19 and 20.
SPEED DIAL LIST
▼
▼
<
<
▼
ENTER NAME
#
05
▼
▼
1234567
#
05
▼
▼
To Next Page
Loading...
