2.1 PBX Integration Features
12 Feature Manual
2.1 PBX Integration Features
2.1.1 Integration Types
Description
In order for the VPS to function, it must be integrated with the PBX it serves. The type of integration
that is used determines how voice (caller messages, VPS prompts, etc.) and data (extension status,
button presses, etc.) are sent between the VPS and the PBX.
Depending on the model and/or the software version of the connected PBX, you may not be able to
utilize some of the features. For more information, call National Parts Center at 1-800-833-9626.
DPT Integration
When the VPS and PBX use DPT Integration, voices and data are sent digitally. DPT Integration
provides certain VPS features which are not available with analogue integration (i.e., Inband
Integration), including:
– Auto Configuration
– Automatic Log-in
– Caller ID Call Routing
– Caller ID Screening
– DID Call Routing *
– Caller Name Announcement (System/Personal)
– Intercom Paging
– Live Call Screening
– Personal Greeting for Caller ID
– Service Mode (PBX Control Mode)
– Trunk Service (Universal Port)
– Remote Call Forwarding Set *
– Time Synchronization with PBX *
– Timed Reminder Setting *
–Two-way Record
–Two-way Transfer
* available for DPT Integration only
APT Integration (KX-TVA50 only)
When the VPS and PBX use APT Integration, voices are sent using analogue technology, and data
is sent digitally. APT Integration provides certain VPS features which are not available with analogue
integration (i.e., Inband Integration), including:
– Auto Configuration
– Automatic Log-in (except DID setting)
– Caller ID Call Routing
– Caller ID Screening
– Caller Name Announcement (System/Personal)
– Intercom Paging
– Live Call Screening
To Next Page
Loading...
