Panasonic KX-TVM50 - 4.4 KX-TE Series PBX Programming for APT Integration

4.4 KX-TE Series PBX Programming for APT Integration
Installation Manual 115
4.4 KX-TE Series PBX Programming for APT
Integration
The instructions in this section are for programming a KX-TE series PBX via the Operating and
Maintenance Tool. To program a KX-TE series PBX using the Manager Extension, follow the
instructions for KX-TA series PBX programming by referring to 4.7 KX-TA Series PBX Programming
for APT Integration.
Note
• For KX-TES824/TEM824, PBX software version 1.0.44 or later is required for APT
Integration. Consult your dealer for more information.
1. Go to the "1.System-1.Date & Time" screen. Set the date and time. Click "Apply" to save the
changed data.
2. Go to the "1.System-2.Main" screen.
Under "Voice Mail", select "APT Integration", then select each extension jack that is connected
to the VPS. Click "Apply" to save the changed data.