3.1 Overview
84 Installation Manual
3.1 Overview
After wall mounting and connecting the VPS to the PBX, you can begin programming the VPS. This
programming should be performed by the installer, using the KX-TVM/NCV Maintenance Console
software. This software can be used to set system parameters, change system prompts, diagnose
system functions, etc.
KX-TVM/NCV Maintenance Console supports connection to the VPS via USB, LAN, and modem. For
details on how to connect the PC to the VPS, see 2.9 PBX Connections. For detailed information on
all programming parameters available through KX-TVM/NCV Maintenance Console, refer to the
Programming Manual or the software's on-line Help feature.
This section explains how to install the software on a PC. Normally you should install the software
KX-TVM/NCV Maintenance Console on a PC that will be on-site with you during initial programming.
To Next Page
Loading...
