4.6 KX-TD500 PBX Programming for DPT Integration
130 Installation Manual
6. To set the trunk features, follow the instructions in "Settings for the trunk features" (5.6 KX-TD500
PBX Programming for Inband Integration).
Note
• If you want to use the features which utilise DID numbers (e.g., Toll Saver, DID Call Routing),
consult your dealer for information on sending DID numbers to the VPS.
7. Make sure all installation and line connections have been completed as described in Section 2
Installation.
8. Connect the jack assigned in Step 4 to the VPS.
9. Complete the PBX-VPS connection by following from step 1 of 4.8 Completing the PBX-VPS
Connection.
To Next Page
Loading...
