5.2 PBX Settings for Inband Integration
162 Installation Manual
Sequences for Voice Mail Integration
Use the KX-TVM/NCV Maintenance Console software to program the following sequences using the
sequence codes listed here.
PBX Type
T308/
T616
T1232/TE
Series/TA
Series
T96 T336
TD612/
TD816/
TD1232/
TD308
TD500
TDA
series
Other
Manufacturers
Operator Transfer
Sequence
FTX FTX FTX FTX FTX FTX FTX FX
Extension
Transfer
Sequence
FTX FTX FTX FTX FTX FTX FTX FX
Alternate
Extension
Transfer
Sequence
FTX FTX FTX FTX FTX FTX FTX FX
Reconnect
Sequence on
Busy
FWW FWW FWW FWW FWW FWW FWW FWW
Reconnect
Sequence on No
Answer
FWW FWW FWW FWW FWW FWW FWW FWW
Reconnect
Sequence on
Refuse Call
FWW FWW FWW FWW FWW FWW FWW FWW
Light-On
Sequence for
Message Waiting
Lamp
N/A T701X# T#91X
T9X
T701X T701X
T 701X
*
Light-Off
Sequence for
Message Waiting
Lamp
N/A T702X# T#90X T#9X T700X T700X
T 700X
*
Call Waiting
Sequence
N/A 2 N/A N/A 1 1 1 *
Release
Sequence for Call
Waiting
N/A F N/A N/A F F F *
* Check with manufacturer.
N/A Not Available
The remainder of this section consists of step-by-step guides for software
verification and programming for select Panasonic PBX systems.
To Next Page
Loading...
