2. Supported devices and formats
4
Extension Format Limitation
Jpg/jpeg/jpe JPEG Number of pixels: Maximum 4096 x 4096 (supports baseline only)
YUV format: supports YUV444, YUV442 and YUV440
Colour mode: supports RGB only
Bmp
(65/75/84EF1, VF1H
and SF2 series only)
Windows
Bitmap
Number of pixels: Maximum 4096 x 4096 (1 bit, 4 bits, 8 bits, 24
bits)
Following formats are not supported: Run-length encoding, bit field,
top-down, transparent Data
<Still pictures>
<Supported devices>
Commercially available USB memory devices are supported. (Those with security functions
are not supported. Operation is not guaranteed.)
USB memory devices other than those formatted in FAT16 or FAT32 cannot be used.
Up to 32 GB of USB memory in size are supported.
Only single partition configuration is supported.
Depending on the type of a USB memory device, it may come in contact with the periphery
such as a back cover, and cannot be attached. Use a commercially sold extension cable, or
use a small type of a USB memory device connectable to this unit.
Only jpg files (except progressive JPEG) can be used for still images when using multiple monitoring &
control software.
Extension Codec
Video Audio
avi MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3(MP3), Linear
PCM
mkv MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3, Linear PCM,
AAC, HE-AAC
Asf/wmv MPEG4 AVC/H.264, MPEG-4 Visual, VC-1
Advanced, VC-1, Simple & Main
MPEG-1/2 Audio Layer-3, WMA
Standard, WMA9/10Pro
Ts/mts MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3, HE-AAC
Mp4 MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3, AAC, HE-AAC
3gp MPEG4 AVC/H.264, MPEG-4 Visual AAC, HE-AAC
mov MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3, Linear PCM,
AAC, HE-AAC
Flv/f4v MPEG4 AVC/H.264 MPEG-1/2 Audio, Layer-3, AAC, Linear
PCM
<Motion pictures>