77
Category Name Code Function Page
Flying object
Trigger condition TRG Sets the ying object/static object marking, and the
condition of ying object.
P.133
Delay DLY Sets the delay time and distance from trigger input to
marking startup.
P.134
Marking interval INT Sets the marking interval (distance) in “Equidistant
Marking” setting for ying object marking.
P.134
Flying object wait MWT Sets the waiting time for marking corresponding to the
line speed for ying object marking.
P.135
Line speed LSP Sets the line speed in ying object marking. P.135
Encoder signal ENC Sets the encoder pulse value for use of the encoder in
ying object marking.
P.136
Maintenance
Laser check radiation SPT Controls “Laser Check Radiation” for laser radiation at
the center of the marking area.
P.136
Power check
[LP-V/ LP-W series only]
PWR Measures the current power ratio [%] in comparison
with the default laser power.
P.137
Error code ECR Reads out the error code of alarm or warning when an
error has occurred.
P.138
Environment
Year/Month/Date/Time YMD Sets year, month, date, time for system. P.139
Era year ERA Sets era year. P.139
Week setting WKM Sets the update timing of week number and sets the
denition of the rst week of the year.
P.140
I/O environment ENV Sets the operating environment of the I/O terminal and
I/O connector.
P.140
To Next Page