Panasonic LP-V15U - Page 84

84
⿎
File registration : FRG
Register the le under editing to the specied No.
• Registration of le
Register the le of specied number.
STX FRG S
[File No.]
4-byte
(Check sum) Delimiter
Name Data length [byte] Description Remarks
File No. 4 “0000”–“2047”
Register the le currently used to the
le of specied number and change the
le number currently being edited to the
specied number.
⿎
File name : FNM
Sets name (comment) of le under editing.
• Setting / Readout data of le name
STX FNM
Sub
command
[File name]
Max. 20-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of le name
STX FNM R (Check sum) Delimiter
Name Data length [byte] Description Remarks
File name Max. 20
Specify the le name
of currently specied
number with 10 or less
characters of shift-
JIS code, or 20 or less
characters of ASCII
code. Specify 0 byte
to the le name to be
deleted.
Ex) When changing to a le name (comment) with
“ABCD”, set as follows:
• When specifying the le name in shift-JIS code:
82,60,82,61,82,62,82,63(HEX)
• When specifying the le name in ASCII code:
41,42,43,44(HEX)
ME-LP400V-EX-6