Panasonic LP-V15U - Page 89

89
⿎
Rank condition : RKC
Sets input conditions of “Rank Function” to switch characters using I/O input.
• Setting / Readout data of rank condition
STX RKC
Sub
command
[Parallel input]
1-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of rank condition
STX RKC R (Check sum) Delimiter
Name Data length [byte] Description Remarks
Parallel input 1
“1”: 4-bit × 4
“2”: 8-bit × 2
⿎
Rank character string : RKS
Sets character string used for “Rank Function” to switch characters using I/O input.
• Setting / Readout data of rank character string
STX RKS
Sub
command
[Data No.] [Marking character string]
Max. 21-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of rank character string
STX RKS R
[Data No.]
3-byte
(Check sum) Delimiter
Name Data length [byte] Description Remarks
Data No. 3
Parallel input Setting range
8-bit x 2 (D15-8) “256”–“511”
8-bit x 2 (D7-0) “000”–“255”
4-bit x 4 (D15-12) “048”–“063”
4-bit x 4 (D11-8) “032”–“047”
4-bit x 4 (D7-4) “016”–“031”
4-bit x 4 (D3-0) “000”–“015”
The number in which the character
string is set is indicated.
The setting range varies
depending on the condition of
parallel input.
Marking
character
string
Max. 18
Use the shift-JIS code.
(Up to 9 characters)
The character string to be marked
with the specied data No. is set.
Specify 0-byte of data length to
delete the character string in the
data No.
ME-LP400V-EX-6