63
DVQX2448 (ENG)
7. Brightness (Exposure)/Coloring/Picture effect
• In [ ] mode, you can compensate the exposure by setting the ISO
sensitivity to [AUTO].
• When the exposure compensation value falls below or exceeds ±3 EV, the
brightness of the recording screen will no longer change.
Press the shutter button halfway or use AE Lock to reflect the value on the
recording screen.
• The set exposure compensation value is stored even if you turn off the
camera.
ISO Sensitivity
You can set light sensitivity (ISO sensitivity).
With the default settings, you can set 200 to 25600 in 1/3 EV increments.
1
Press [ ] ( ).
2
Select ISO sensitivity.
● Rotate or .
2
00
4
0
3
Confirm your selection.
● Press the shutter button halfway.
To Next Page
Loading...
Need help?
General
