118
4K Photo and Drive Settings
Burst function
Focusing in burst mode
Focusing varies depending on focus settings and the setting of [Focus/Release Priority] in the
[Custom] ([Focus / Release Shutter]) menu.
Focus settings [Focus/Release Priority] [H] [M], [L]
[AFS]
[FOCUS]/
[BALANCE]/
[RELEASE]
At the first picture
[AFF] / [AFC]
*
2
[FOCUS]
Predicted focusing
*
3
Normal focusing
*
4
[BALANCE]/
[RELEASE]
Predicted focusing
*
3
[MF] — Focus set with Manual Focus
*
2
Focus is fixed in the first picture when dark subjects are recorded.
*
3
The camera predicts the focus within a possible range by giving higher priority to the burst speed.
*
4
Since the camera records a burst of pictures while it adjusts the focus, the burst speed may be
slower.
●
The burst speed may become slower depending on the following settings:
[Sensitivity], [Picture Size], [Quality], [AFS/AFF/AFC], [Focus/Release Priority]
●
When the burst speed is set to [H] (when focus mode is [AFS] or [MF]), the exposure is fixed at
the settings used for the first picture for the subsequent picture as well. In other cases, the camera
adjusts the exposure for each frame.
●
It may take a while to store still pictures that were taken using the burst function. If you
continue to record while storing, the number of burst pictures that can be taken will be
reduced. A high-speed card is recommended when recording using the burst function.
●
This function is not available in the following cases:
• [Glistening Water], [Glittering Illuminations], [Handheld Night Shot], [Soft Image of a Flower]
(Scene Guide Mode)
• [Rough Monochrome], [Silky Monochrome], [Miniature Effect], [Soft Focus], [Star Filter],
[Sunshine] (Creative Control Mode)
• In Self Shot Mode
• When recording using the flash
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
To Next Page
Loading...
Need help?
General
