50
Basics
Assigning frequently used functions to the buttons (Function buttons)
●
When [Video Record] is assigned to the function button, you can start and stop recording motion
pictures in the same way as pressing the motion picture button.
●
When [Focus Area Set] is assigned to the function button, you can display the AF area or the MF
Assist position setting screen.
●
When [Operation Lock] is assigned to the function button, you can disable the operations that
were set using [Operation Lock Setting] in the [Custom] ([Operation]) menu. To cancel the lock,
press the function button to which [Operation Lock] is assigned again.
●
When [Rec / Playback Switch] is assigned to the function button, you can switch between
recording mode and playback mode.
●
To restore the default function button settings, select [Restore to Default].
●
If the screen displays or similar, the displayed operation will be
performed instead of the function assigned to function buttons by
[Fn Button Set].
Using the function buttons during playback
You can directly set an assigned function to a selected image by pressing the function
button during playback.
Example: When [Fn2] is set to [Rating★3]
1
Press to select the picture
2
Press [Fn2] button, and then set the picture as
[Rating★3]
■
Functions that can be assigned in [Setting in PLAY mode]
• The following functions can be assigned to the button [Fn1], [Fn2] or [Fn4].
• [Wi-Fi]: [Fn1]
*
1
• [LVF/Monitor Switch]: [Fn4]
*
1
• [Rec / Playback Switch]
• [4K PHOTO Play]
• [Delete Single]
• [Protect]
• [Rating★1]
• [Rating★2]
• [Rating★3]: [Fn2]
*
1
• [Rating★4]
• [Rating★5]
• [RAW Processing]
• [4K PHOTO Bulk Saving]
• [Off]
*
2
*
1
Function button settings at the time of purchase.
*
2
No function is assigned to function buttons.
●
If you assign [4K PHOTO Play], a screen will be displayed, allowing you to select the pictures to
be extracted from a 4K burst file and saved.
●
To restore the default function button settings, select [Restore to Default].
To Next Page
Loading...
Need help?
General
