Panasonic LUMIX DC-TZ95D User Manual

20
Preparations
Charging battery
Inserting the battery
To charge the battery, insert it into the camera.
1
Slide the release lever to the [OPEN]
position and open the card/battery door
Release lever
[OPEN] [LOCK]
2
Insert the battery all the way
• Insert the battery all the way firmly and check
that it is locked by lever.
3
Close the card/battery door and then
slide the release lever to the [LOCK]
position
Make sure to insert the battery in the correct
orientation.
Lever
■
To remove battery
Move the lever in the card/battery
compartment in the direction of the arrow.
●
Always use genuine Panasonic batteries.
●
If you use other batteries, we cannot guarantee the quality of this product.
●
To remove the battery, turn the camera off and wait until the LUMIX indicator on the screen goes
off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded
data.)
●
Remove battery from camera after use.

Panasonic LUMIX DC-TZ95D Specifications

General

Sensor Size	1/2.3-inch
Lens	LEICA DC VARIO-ELMAR
Optical Zoom	30x
Digital Zoom	4x
Maximum Aperture	f/3.3 - 6.4
LCD Monitor	3.0-inch
Connectivity	Wi-Fi, Bluetooth
Sensor	MOS Sensor
Focal Length	4.3 - 129mm (35 mm equivalent: 24-720 mm)
Image Stabilization	5-axis Hybrid O.I.S. +
ISO Range	80 - 3200
ISO Sensitivity	Auto, 80, 100, 200, 400, 800, 1600, 3200, 6400
Shutter Speed	4 - 1/2000 sec (Mechanical Shutter)
Display	3.0-inch TFT Screen LCD Display
LCD Screen Resolution	1, 040k dots
Viewfinder	0.21-inch Live View Finder
Video Recording	[4K] 3840 x 2160 at 30p/ 25p/ 24p
Battery	Li-ion Battery Pack
Battery Life	Approx. 380 images (rear monitor)
Weight	Approx. 328 g (with battery and SD memory card)