Panasonic LUMIX DC-TZ95D User Manual

276
Connecting with other devices
Printing
You can connect a camera directly to a PictBridge-compatible printer for printing.
Preparations
• Adjust the print quality or other settings on your printer, as needed.
• Turn on the camera and printer.
1
Connect camera to printer
• Check the plug direction and insert it straight in. (If the cable is inserted in the
wrong direction, the plug could become deformed and cause faulty operation.)
Also, do not insert into the wrong socket. Doing so may cause damage to this unit.
• Do not use any other USB connection cables except the supplied one.
[ ]
• Do not disconnect the USB connection cable (supplied) when the cable disconnection icon
[
] is displayed (may not be displayed with some printers).
[USB/CHARGE] socket
USB connection cable (supplied)
2
Use to select [PictBridge(PTP)] and press [MENU/SET]
3
Use to select a picture and press [MENU/SET]
4
Use to select [Print start] and press [MENU/SET]

Panasonic LUMIX DC-TZ95D Specifications

General

Sensor Size	1/2.3-inch
Lens	LEICA DC VARIO-ELMAR
Optical Zoom	30x
Digital Zoom	4x
Maximum Aperture	f/3.3 - 6.4
LCD Monitor	3.0-inch
Connectivity	Wi-Fi, Bluetooth
Sensor	MOS Sensor
Focal Length	4.3 - 129mm (35 mm equivalent: 24-720 mm)
Image Stabilization	5-axis Hybrid O.I.S. +
ISO Range	80 - 3200
ISO Sensitivity	Auto, 80, 100, 200, 400, 800, 1600, 3200, 6400
Shutter Speed	4 - 1/2000 sec (Mechanical Shutter)
Display	3.0-inch TFT Screen LCD Display
LCD Screen Resolution	1, 040k dots
Viewfinder	0.21-inch Live View Finder
Video Recording	[4K] 3840 x 2160 at 30p/ 25p/ 24p
Battery	Li-ion Battery Pack
Battery Life	Approx. 380 images (rear monitor)
Weight	Approx. 328 g (with battery and SD memory card)