Panasonic LUMIX DC-TZ95D User Manual

132
4K Photo and Drive Settings
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
Select the focus point and save the picture ([Post Focus])
1
On the playback screen, select the image with the
[ ] icon and press
• The same operation can be performed by touching [ ].
2
Touch the focus point
• If there are no pictures with the focus on the selected point, a red
frame will be displayed, and pictures cannot be saved.
• The edge of the screen cannot be selected.
Operation Touch operation Description
Touch
Selects focus point
• No selection can be made while display is enlarged.
Enlarges the display
Reduces the display (when in enlarged display)
[Fn1]
Switches to [Focus Stacking] operation (→133)
[Fn2]
In-focus portions are highlighted with colour. ([Peaking])
• Switches in order of [
] → [ ] ([LOW])
→ [
] ([HIGH]).
[MENU/SET]
Saves the picture
• You can make fine adjustments to the focus by dragging the
slide bar during enlarged display. (The same operation can be
performed using .)
3
Touch [ ] to save the picture
• The selected picture will be saved as a new separate file in the JPEG format.

Panasonic LUMIX DC-TZ95D Specifications

General

Sensor Size	1/2.3-inch
Lens	LEICA DC VARIO-ELMAR
Optical Zoom	30x
Digital Zoom	4x
Maximum Aperture	f/3.3 - 6.4
LCD Monitor	3.0-inch
Connectivity	Wi-Fi, Bluetooth
Sensor	MOS Sensor
Focal Length	4.3 - 129mm (35 mm equivalent: 24-720 mm)
Image Stabilization	5-axis Hybrid O.I.S. +
ISO Range	80 - 3200
ISO Sensitivity	Auto, 80, 100, 200, 400, 800, 1600, 3200, 6400
Shutter Speed	4 - 1/2000 sec (Mechanical Shutter)
Display	3.0-inch TFT Screen LCD Display
LCD Screen Resolution	1, 040k dots
Viewfinder	0.21-inch Live View Finder
Video Recording	[4K] 3840 x 2160 at 30p/ 25p/ 24p
Battery	Li-ion Battery Pack
Battery Life	Approx. 380 images (rear monitor)
Weight	Approx. 328 g (with battery and SD memory card)