Panasonic LUMIX DC-TZ95D User Manual

296
Others
Q&A Troubleshooting
■
Others
The lens makes a clicking noise.
• When the camera is turned on or off, the lens is moved, or an aperture operation is performed,
such a noise may be heard. This is not a malfunction.
• When the brightness changes after a zooming operation or moving the camera, the lens may make
a noise while adjusting the aperture. This is not a malfunction.
Zooming stops instantaneously.
• When using the Extra optical zoom, the zooming action will stop temporarily. This is not a
malfunction.
Red lamp illuminated when pressing shutter button halfway in dark locations.
• [AF Assist Lamp] is set to [ON] (→188).
Camera is hot.
• Camera may become a little warm during use, but this does not affect performance or quality.
Clock is incorrect.
• If you do not use the camera for a long time, the clock may be reset.
→ Reset the clock (→30).
When using zoom, picture becomes slightly warped and the edges of the subject become
coloured.
• Pictures may be slightly warped or coloured around the edges, depending on the zoom ratio, but
this is not a fault.

Panasonic LUMIX DC-TZ95D Specifications

General

Sensor Size	1/2.3-inch
Lens	LEICA DC VARIO-ELMAR
Optical Zoom	30x
Digital Zoom	4x
Maximum Aperture	f/3.3 - 6.4
LCD Monitor	3.0-inch
Connectivity	Wi-Fi, Bluetooth
Sensor	MOS Sensor
Focal Length	4.3 - 129mm (35 mm equivalent: 24-720 mm)
Image Stabilization	5-axis Hybrid O.I.S. +
ISO Range	80 - 3200
ISO Sensitivity	Auto, 80, 100, 200, 400, 800, 1600, 3200, 6400
Shutter Speed	4 - 1/2000 sec (Mechanical Shutter)
Display	3.0-inch TFT Screen LCD Display
LCD Screen Resolution	1, 040k dots
Viewfinder	0.21-inch Live View Finder
Video Recording	[4K] 3840 x 2160 at 30p/ 25p/ 24p
Battery	Li-ion Battery Pack
Battery Life	Approx. 380 images (rear monitor)
Weight	Approx. 328 g (with battery and SD memory card)