Charging
the
Battery
• About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCF10PP.
It
has been found that counterieit battery packs which look very similar to the genuine
product are made available to purchase
in
some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There
is
a possibility that these battery packs may lead
to fire or explosion. Please
be
advised that we are not liable for any accident
or
failure
occurring as a result of use of a counterieit battery pack.
To
ensure that safe products are
used we would recommend that a genuine Panasonic battery pack is used.
• Use the dedicated charger and battery.
• The camera has a function for distinguishing batteries which can be used safely.
The dedicated battery (DMW-BCF10PP) supports this function. The only batteries
suitable for use with this unit are genuine Panasonic products and batteries
manufactured by other companies and certified by Panasonic. (Batteries which do
not support this function cannot be used). Panasonic cannot
in
any way guarantee
the quality, performance or safety of batteries which have been manufactured by
other companies and are not genuine Panasonic products.
• The battery is not charged when the camera
is
shipped. Charge the battery before
use.
• Charge the battery with the charger indoors.
• Charge the battery
in
a temperature between
10°C
to 35 °C (50
of
to 95
OF).
(The
battery temperature should also be the same.)
Attach the battery paying attention to the direction
of the battery.
Connect the charger to the electrical outlet.
• Charging starts when the [CHARGE] indicator ®
lights green.
• Charging is complete when the [CHARGE]
indicator ® turns off (after approx. 130 min).
10 VQT2B45 (ENG)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
