Advanced (Recording pictures)
- 90 -
∫ Finely adjusting the white balance [ ]
You can finely adjust the white balance when you cannot acquire the desired hue by
setting the white balance.
•
It can be set from the quick menu (P26).
1 Select [WHITE BALANCE] and then press 1
•
Press 1 again if [ ], [ ] or [ ] is selected.
2 Press 3/4/2/1 to adjust the white balance and then press
[MENU/SET].
•
If you finely adjust the white balance to A (amber), the white balance icon on the LCD
monitor will change to orange. If you finely adjust the white balance to B (blue), the white
balance icon on the LCD monitor will change to blue.
• If you finely adjust the white balance to G_ (green) or M` (magenta), [_] (green) or [`]
(magenta) appears beside the white balance icon on the LCD monitor.
• Select the centre point if you are not finely adjusting the white balance.
• You can finely adjust the white balance independently for each white balance item.
• The white balance fine adjustment setting is memorised even if the camera is turned off.
• The white balance fine adjustment setting is reflected in the picture when using the flash.
• The white balance fine adjustment level returns to the standard setting (centre point) in
the following cases.
– When you reset the white balance in [ ] or [ ]
– When you reset the colour temperature manually in [ ]
2 :
A (AMBER: ORANGE)
1 :
B (BLUE: BLUISH)
3 : G_ (GREEN: GREENISH)
4 : M` (MAGENTA: REDDISH)
SET
To Next Page
Loading...
Need help?
General
