- 95 -
Advanced (Recording pictures)
∫ Setting up [ ] (AF Tracking)
Note
•
Dynamic tracking function may fail to lock, lose the subject in AF tracking, or track different
subject depending on the recording conditions such as the ones below.
– When the subject is too small
– When the recording location is too dark
– When the subject is moving too fast
– When the background has the same or similar colour to the subject.
– When jitter is occurring
– When using the zoom
• If it fails to lock, AF area will flash in red, and disappear. Press 4 again.
• AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [Ø] in [AF MODE] in that case.
• [QUICK AF] will not operate during AF tracking.
• AF tracking cannot be selected when [COLOR EFFECT] is set.
• It is not possible to set [ ] in [STARRY SKY], [FIREWORKS], [PIN HOLE] or [FILM GRAIN] in
scene mode, or in the motion picture mode.
• The focus range becomes the same as macro mode. [5 cm (Wide)/30 cm (Tele) to ¶]
1 Bring the subject to the AF tracking
frame, and press 4 to lock the subject
•
AF tracking frame will continuously focus on
the subject's movement once the subject is
recognised.
• AF tracking is turned off when 4 is pressed
again.
Before locking Locked
2 Take the picture
To Next Page
Loading...
