Panasonic Lumix DMC-G1 - [FLASH ADJUST.]; Adjusting Flash Output; [I.EXPOSURE]; Intelligent Exposure Adjustment

VQT1U32
102
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P27.
You can adjust the flash output.
Applicable modes:
[s2EV]/[s12/3EV]/[s1 1/3 EV]/[s1EV]/[s2/3 EV]/[s1/3 EV]/[0 EV]/[r1/3 EV]/
[r2/3 EV]/[r1EV]/[r11/3EV]/[r12/3EV]/[r2EV]
Note
•
Refer to P61 for details.
For details on [REC] mode menu settings, refer to P27.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to real life.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•
Even if the ISO sensitivity is set to [ISO100], ISO sensitivity may become higher than [ISO100]
when a picture is taken with [I.EXPOSURE] enabled.
• Compensation effect may not be achieved depending on the conditions.
• [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
• [LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
For details on [REC] mode menu settings, refer to P27.
Enlarging a picture with no picture quality deterioration
Applicable modes:
[OFF]/[ON]
Note
• Refer to P48 for details.
For details on [REC] mode menu settings, refer to P27.
This can enlarge subjects even more than the optical zoom or extended optical zoom.
Applicable modes:
[OFF]/[2t]/[4t]
Note
• Refer to P48 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [MODE1].
[FLASH ADJUST.]
[I.EXPOSURE] (Intelligent exposure adjustment)
[EX. OPT. ZOOM]
) [DIGITAL ZOOM]