- 121 -
Recording
Entering Text
It is possible to enter babies’ and pets’ names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
Display the entry screen.
• You can display the entry screen via the following operations.
– [NAME] of [BABY1]/[BABY2] or [PET] in Scene Mode (P108)
– [NAME] in [FACE RECOG.] (P118)
– [LOCATION] in [TRAVEL DATE] (P63)
– [TITLE EDIT] (P147)
Press 3/4/2/1 to select text and then press
[MENU/SET] to register.
• The following operations can be performed by selecting the
item and pressing [MENU/SET]:
– [_]: Enter a blank
– [ ]: Text between [A] (capitals), [a] (small case), [1]
(numbers) and [&] (special characters).
– [DELETE]: Delete a character
– [ ]: Move the entry position cursor to the left
– [ ]: Move the entry position cursor to the right
• The entry position cursor can be moved left and right with the control dial.
• To enter the same character again, rotate the control dial to move the cursor.
• A maximum of 30 characters can be entered. (Maximum of 9 characters when setting
names in [FACE RECOG.])
Press 3/4/2/1 to move the cursor to [SET] and then press
[MENU/SET] to end text input.
Note
•
Text can be scrolled if all of the entered text does not fit on the screen.
• [NAME] of [BABY1]/[BABY2] or [PET] can also be entered by touch operation.
To Next Page
Loading...
