- 33 -
Basic
• Set the drive mode to [ ] by pressing 4().
Selecting the Recording Mode.
• For details on setting up Recording Mode, refer to P28.
Taking a Still picture
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
• Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not achieved,
except when set to flash.)
• When the image is correctly focused, the picture
will be taken, since the [FOCUS PRIORITY] (P139)
is set initially to [ON].
Press the shutter button fully (push it in
further), and take the picture.
To Next Page
Loading...
Need help?
General
