- 169 -
Connecting to other equipment
File formats that can be used: [AVCHD], [Motion JPEG]
Copy images played back with this unit to Blu-ray disc, DVD disc, hard disk, or video using
a Blu-ray Disc Recorder, DVD recorder, or video.
This can be played back with equipment that is not compatible with high-definition
(AVCHD), so it is convenient for distributing copies. Image will be standard quality instead
of high-definition at this time.
1 Connect this unit with the recording equipment with an AV cable (supplied).
2 Start the playback of this unit.
3 Start the recording on the recording equipment.
•
When ending the recording (copying), stop the playback on this unit after stopping the
recording on recording equipment.
Note
•
When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV ASPECT] (P66)
on this unit to [4:3] before starting a copy. The image will be vertically long if you play back
motion pictures copied with [16:9] setting on a [4:3] aspect TV.
• Do not use any other AV cables except the supplied one.
• See the instruction manual for the recording equipment for details about copying and playing
back.
Copy the playback image using an AV cable
1 Yellow: to the video input socket
2 White: to the audio input socket
A AV cable (supplied)
To Next Page
Loading...
Need help?
General
