51
VQT3A36
Basic
• The settings of the following items are fixed.
¢4 It will be set to Multi Auto Focus Mode for motion pictures when a face cannot be detected
while recording motion pictures.
¢5 The setting is fixed to [AUTO] (for motion pictures) when recording motion pictures.
• Depending on the scene detected, camera will automatically adjust the setting of the
[I.RESOLUTION] (P122). [I.RESOLUTION] cannot be set via the [REC] Mode menu.
• The following functions cannot be used.
– [AUTO LCD OFF] of [ECONOMY]/AF/AE lock/White Balance fine adjustment/White Balance
Bracket/Multi Film Bracket/Flash output adjustment/[ISO LIMIT SET]/[EX. TELE CONV.]/
[DIGITAL ZOOM]/[ASPECT BRACKET]/[HIGHLIGHT]/[AF/AE LOCK]/[AF/AE LOCK HOLD]/
[DIRECT FOCUS AREA]/[SHOOT W/O LENS]
• The other items on the [SETUP] menu and [CUSTOM] menu can be set in a mode such as the
Program AE Mode. What is set will be reflected in the Intelligent Auto Mode.
∫ Flash
•
Open the flash when the flash is to be used. (P68)
• While using the Intelligent Auto Mode, the flash mode is fixed.
• [ ], [ ], [ ] or [ ] is set depending on the type of subject and brightness.
• When [ ] or [ ] is displayed, the Digital red-eye correction is turned on.
• Shutter speed will be slow when using [ ] or [ ].
Item Settings
[ECONOMY]
([SLEEP MODE]) (P59)
[5MIN.]
Flash (P68) []/[Œ]
[FLASH SYNCHRO] (P122)
[1ST]
[BURST RATE] (P76) [H] (High speed)
[AUTO BRACKET] (P78) [ / SETTINGS]: [ ] (burst)
[STEP]:
[3•1/3]
[SEQUENCE]: [0/`/_]
AF Mode (P81) [š] (Set to [ ]
¢4
when a face cannot be detected)
[WHITE BALANCE] (P87) [AWB]
[SENSITIVITY] (P90) []
¢5
(Intelligent ISO)
(The maximum ISO sensitivity: [ISO800])
[METERING MODE] (P121)
[C]
[RED-EYE REMOVAL] (P69)
[ON]
[I.DYNAMIC] (P123) [STANDARD]
[LONG SHTR NR] (P123) [ON]
[COLOR SPACE] (P125) [sRGB]
[PICTURE MODE] (P107) []
[PRE AF] (P130) []
[FOCUS PRIORITY] (P130)
[ON]
[AF ASSIST LAMP] (P131) [ON]
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 51 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
Need help?
General
