141
5. Focus and Brightness (Exposure) Settings
Applicable modes:
This allows the focusing method that suits the positions and number of the subjects to be
selected.
1
Press 2 ().
2
Press 2/1 to select AF Mode and then
press [MENU/SET].
Selecting the Auto Focus Mode
([Face/Eye
Detection])
The camera automatically detects the person’s
face and eyes.
An eye closer to the camera will be in focus, while
the exposure will be optimized for the face.
(When [Metering Mode] is set to [ ])
• Up to 15 faces can be detected. Eyes that can be detected are only
those of the face that is in focus.
• You can change the eye to be in focus. (P143)
• Position and size of the AF area can be changed. (P146)
([Tracking])
The camera focuses on the subject you specify.
The exposure will be optimized for the subject.
(When [Metering Mode] is set to [ ].)
Focus and exposure will keep on following the
subject even if it moves. (Dynamic tracking) (P144)
[]
([23-Area])
Up to 23 AF areas can be focused.
This is effective when a subject is not in the center
of the screen.
• You can select areas to be in focus. (P146)
To Next Page
Loading...
