195
8. Stabilizer, Zoom and Flash
Optical Image Stabilizer
Applicable modes:
The camera detects jitter during recording and automatically corrects it, so you can record
images with reduced jitter.
•
When using an optional interchangeable lens with an O.I.S. switch, it is possible to set to
enable the Optical Image Stabilizer by switching the O.I.S. switch on the lens to [ON].
(At the time of purchase, it is initially set to [ ].)
∫ Setting the Stabilizer in the [Rec] menu
1
Select the menu. (P57)
2
Press 3/4 to select the item and then press [MENU/SET].
• The [Stabilizer] feature is only available if the lens you are using has an internal stabilizer.
• Exit the menu after it is set.
A lens which supports the stabilizer function is required.
•
The interchangeable lens (H-FS12032/H-FS35100) supports the Optical Image Stabilizer
function.
• The interchangeable lens (H-X015) does not support the Optical Image Stabilizer function.
> [Rec] > [Stabilizer]
[]
([Normal])
Vertical and horizontal shake are compensated for.
[]
([Panning])
Camera shake is corrected for up/down movements.
This mode is ideal for panning (a method of taking
pictures which involves turning the camera to track the
movements of a subject which continues to move in a
fixed direction).
[OFF]
[Stabilizer] does not work.
(This can be selected only when using a lens without the [O.I.S.] switch.)
To Next Page
Loading...
