6. Shutter and Drive Settings
168
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
1
Press 4 ().
2
Press 2/1 to select the drive mode, and
then press [MENU/SET].
A Drive mode
• To cancel the drive mode, select [ ]. The setting will switch to [Single].
• Settings for each drive mode can be changed by pressing 3.
1 [Single]
When the shutter button is pressed, only one picture is
recorded.
2 [Burst] (P169)
Recordings are made in succession while the shutter
button is pressed.
3 [Auto Bracket] (P172)
Each time the shutter button is pressed, recordings
are made with different exposure settings according to
the Exposure Compensation range.
4 [Self Timer] (P175)
When the shutter button is pressed, recording takes
place after the set time has elapsed.
To Next Page
Loading...
