5. Focus and Brightness (Exposure) Settings
154
• You can also enlarge the area by rotating the focus ring, moving the focus lever, or
pinching out (P53) the screen or touching the screen twice.
• You can also determine the area to be enlarged by dragging (P53) the screen.
• If you press [DISP.], the area to be enlarged will be reset to the center.
4
Adjust the focus.
A Indicator for ¶ (infinity)
B MF Assist (enlarged screen)
C Peaking
D MF Guide
• The in-focus portions will be highlighted. (Peaking)
• You can check whether the point of focus is to the near
side or to the far side. (MF Guide)
You can perform the following operations:
¢ When using an interchangeable lens with no focus ring, you can perform these
operations after pressing
4 to display the screen that lets you set the area to be
enlarged.
• When the picture is displayed in windowed mode, you can enlarge/reduce the picture by
approximately 3 to 6
k; when the picture is displayed in full screen, you can enlarge/
reduce the picture by approximately 3 to 10
k.
Button operation Touch operation Description of operation
3/4/2/1
¢
Dragging Moves the enlarged area
s
Pinching in/out Enlarges/reduces the screen (by steps of 0.1k)
s Enlarges/reduces the screen (by steps of 1.0k)
Switches the enlarged display (windowed/full
screen)
[DISP.]
¢
[Reset]
¢
Resets the area to be enlarged back to the
center.
AF
+
To Next Page
Loading...
Need help?
General
