199
8. Stabilizer, Zoom and Flash
∫ Increasing the zoom magnification in steps
•
This can be used only when recording pictures.
1 Select the menu. (P57)
2 Set a function button to [Zoom Control]. (P64)
•
The following step is an example in which [Zoom Control] is assigned to [Fn1].
3 Press [Fn1].
4 Press 2/1 or 3/4.
•
The zoom operation is terminated when [Fn1] is pressed again or a certain amount of time
passes.
• When using an interchangeable lens that supports the power zoom, Extended Tele Conversion
becomes available after zooming in to the Tele end of the optical zoom.
A Optical Zoom range (Focal length)
¢
B Extended Tele Conversion range for still picture
recording (Zoom magnification)
¢
This zoom slider is displayed when using an
interchangeable lens that supports the power zoom.
•
A constant zoom speed will be set.
• The indicated zoom magnification is an approximation.
∫ Fixing the zoom magnification at the maximum level
Select the menu. (P57)
> [Rec] > [Ex. Tele Conv.] > [ZOOM]
3/1: Tele (Enlarges distant subject)
4/2: Wide (Widens angle of view)
> [Rec] > [Ex. Tele Conv.] > [TELE CONV.]
> [Motion Picture] > [Ex. Tele Conv.] > [ON]
[OFF] [TELE CONV.]/[ON]
MENU
4:3 4:3
To Next Page
Loading...
Need help?
General
