11. Using the Wi-Fi function
258
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
[Wi-Fi]/[Fn1] button can be used in two ways, as [Wi-Fi] or
as [Fn1] (function 1).
At the time of purchase, it is initially set to [Wi-Fi].
•
Refer to P64 for details about the function button.
Pressing and holding [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone)
•
The information required for connecting the smartphone to
this unit (QR code, SSID and password) is displayed. (P262)
Pressing [Wi-Fi] before connecting to Wi-Fi
•
Following items can be selected.
(You can also display the same menu by performing the following operations:
>
[Setup]
→
[Wi-Fi]
→
[Wi-Fi Function].
)
• This owner's manual describe the procedure for [New Connection].
What you can do with the [Wi-Fi] button when connected to Wi-Fi
•
Following items can be selected.
¢1 These items are not displayed when you press
4 to send the displayed image to a web
service (P286) or when you change the settings for sending images or terminate the
connection.
¢2 This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or
[Send Images Stored in the Camera] is set to [Printer].
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection
[New Connection]
[Select a destination from History] (P298)
[Select a destination from Favorite] (P298)
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination]
¢1
Terminates the Wi-Fi connection, and allows you to select
a different Wi-Fi connection.
[Change Settings for Sending
Images]
¢2
Refer to P302 for details.
[Register the Current Destination
to Favorite]
¢1
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
[Network Address] Displays the MAC address and IP address of this unit.
To Next Page
Loading...
