2. Getting Started/Basic Operations
70
[USB Mode]
Select the USB communication system when connecting the
camera to your PC or your printer with the USB connection cable
(supplied).
y [Select on connection]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set when connecting to a printer supporting PictBridge.
z [PC]:
Set when connecting to a PC.
[TV Connection]
This sets how the unit connects to a television etc.
[TV Aspect]:
Set to match the type of TV.
[16:9]:
When connecting to a 16:9 screen TV.
[4:3]:
When connecting to a 4:3 screen TV.
•
This will work when the AV cable (optional) is connected.
[HDMI Mode]:
Set the format for the HDMI output when playing back on the
HDMI compatible high-definition TV connected with this unit using
the HDMI micro cable.
(i: Interlace method, p: Progressive method)
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080p]/[1080i]/[720p]/[480p]
•
This will work when the HDMI micro cable is connected.
•
If no image appears on the TV with [AUTO], switch the setting to a
constant setting other than [AUTO] to set a format supported by your TV.
(Please read the operating instructions for the TV.)
To Next Page
Loading...
