91
3. Recording Modes
Optimizing the ISO sensitivity for the shutter speed and aperture value
When the ISO sensitivity is set to [AUTO], the camera sets the ISO sensitivity
automatically so that the exposure will be appropriate for the shutter speed and aperture
value.
•
Depending on recording conditions, an appropriate exposure may not be set or the ISO
sensitivity may become higher.
Manual Exposure Assistance
•
The Manual Exposure Assistance is an approximation. We recommend checking the pictures
on the playback screen.
∫ About [T] (Time)
If you set the shutter speed to [T] (Time) and fully press the shutter button, an exposure
starts. (Continues up to approximately 60 seconds.)
If you press the shutter button again, the exposure will end.
Since this function allows you to adjust the exposure time to the desired value, it is
convenient for taking pictures of fireworks, night scenes, etc.
•
If you set the shutter speed to [T], [T] is displayed on the screen.
• When you take pictures with the shutter speed set to [T], use a sufficiently charged battery.
(P21)
• The Manual Exposure Assistance does not appear.
• This function is not available when using the electronic shutter.
• It can only be used with Manual Exposure Mode.
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
• When taking pictures with the shutter speed set to [T], we recommend using a tripod
and taking pictures remotely by connecting the camera to a smartphone to prevent
camera shake. (P266)
• When you take pictures with the shutter speed set to [T], noise may become visible. To
avoid picture noise, we recommend setting [Long Shtr NR] in the [Rec] menu to [ON]
before taking pictures. (P135)
To Next Page
Loading...
Need help?
General
