Preparation
18
VQT0W82
Charging the Battery
with the Charger
• The battery is not charged when the
camera is shipped. Charge the battery
before use.
1 Connect the AC cable.
• When you connect the AC cable, the
[POWER] indicator A lights red.
• The battery cannot be charged when
the DC cable is connected to the AC
adaptor.
2 Align the battery with the marks
on the AC adaptor and then place
it straight into the AC adaptor.
Check that it is firmly attached.
• Charging starts when the [CHARGE]
indicator B lights green.
3 Detach the battery after charging
is completed.
• Charging is completed when the
[CHARGE] indicator B turns off (after
about 130 minutes).
• After charging is completed, be sure to
disconnect the AC cable from the
electrical outlet.
• The battery becomes warm after using it
and during and after charging. The
camera also becomes warm during use.
This is not a malfunction.
• The battery will be exhausted if left for a
long period of time after being charged.
Recharge the battery when it is
exhausted.
• Use the dedicated AC adaptor and
battery.
• Use the AC adaptor indoors.
• Do not disassemble or modify the AC
adaptor.
A
B
B
To Next Page
Loading...
Need help?
General
