Menu Settings
76
VQT0W82
Press [ ] to display the [REC] mode
menu and select the item to set. (P75)
Every type of film for film cameras has its
own color tone and contrast characteristics.
In film mode, you can select the color tone
of the pictures from 7 types in the same
way as you would select different films for
film cameras.
Select different settings in film mode to
match the recording situation and your
picture of the recording.
1 Press 3/4 to select [FILM MODE]
and then press 1.
2 Press 3/4 to select the item and
then press [MENU/SET].
• When you press 1 on the screen
shown above, explanations about each
film mode are displayed. (When you
press 2, the screen returns to the
previous screen.)
3 Press [MENU/SET] to close the
menu.
∫ Setting and effect
• [STANDARD] (COLOR)
This is the standard setting.
• [DYNAMIC] (COLOR)
The saturation and contrast of the stored
colors are increased.
• [NATURE] (COLOR)
Brighter red, green and blue. Enhanced
beauty of nature.
• [SMOOTH] (COLOR)
The contrast is lowered for smoother and
clearer color.
• [STANDARD] (B&W)
This is the standard setting.
• [DYNAMIC] (B&W)
The contrast is increased.
• [SMOOTH] (B&W)
Smooths the picture without losing the
skin texture.
•[MYFILM1]
•[MYFILM2]
The saved setting is used. (P87)
• In film mode, the camera may do
something equivalent to pull processing to
create a picture with particular
characteristics. The shutter speed may
become very slow at this time.
[FILM MODE]
Setting the color tone of the
picture to be recorded
SET
MENU
1
/
3
REC
FILM MODE
RAW REC.
PICT.SIZE
QUALITY
OFF
EXIT
MENU
SELECT
ASPECT
FILM MODE
SELECT
1
/
3
STANDARD
DYNAMIC
NATURE
SMOOTH
SET
MENU
SET
MENU
To Next Page
Loading...
Need help?
General
