Basic
32
VQT0W82
Matching the Focus
and the Exposure
Automatically
(AF: Auto
Focus/Program AE mode [ ])
The camera automatically sets the aperture
value and the shutter speed according to
the brightness of the subject.
• Remove the lens cap.
• Turn the camera on. (P25)
• Set the drive mode lever to [
].
A: Shutter button
1 Set the focus mode lever to [AFS].
• AFS is an abbreviation of “Auto Focus
Single”. The focus is fixed when you
press the shutter button halfway.
2 Rotate the shutter speed dial to
[A].
3 Rotate the aperture ring to [A],
while pressing the aperture ring
button B.
• The mode becomes program AE mode
[].
4 Aim the AF frame C to the point
you want to focus on and then
press the shutter button halfway.
G: Viewfinder Display
• You can check the aperture value D
and shutter speed E.
• The camera beeps and the focus
indication F lights when the subject is
focused.
• The focus indication blinks when the
subject is not focused. In this case, a
picture is not taken. Press the shutter
button halfway to focus on the subject
again.
• Refer to P34 for information about
subjects that are difficult to focus on.
A
AFS
AFC
AFL
AEL
MF
250
125
60
30
15
8
4
/
B
2-60s
1
000
-
500
A
4
0
0
0
A
A
B
P
STANDARD
To Next Page
Loading...
Need help?
General
