Advanced
72
VQT0W82
• To avoid picture noise, we recommend
reducing the ISO sensitivity before taking
pictures.
• The ISO sensitivity cannot be set to
[AUTO] in Aperture-priority AE,
Shutter-priority AE or Manual exposure.
Deciding the Method
to Measure Brightness
(Metering mode)
You can switch to the following metering
modes if you rotate the metering mode
lever.
ISO sensitivity 100 1600
Use in bright
places
(e.g. outdoors)
Suitable
Not
suitable
Use in dark
places
Not
suitable
Suitable
Shutter speed Slow Fast
Noise Less Increased
Spot:
This is the method used to focus on
the subject in the limited narrow area
on the center of the screen.
Multiple:
This is the method in which the
camera measures the most suitable
exposure by judging the allocation of
brightness on the whole screen
automatically. Usually, we
recommend using this method.
Center weighted:
This is the method used to focus on
the subject on the center of the
screen and measure the whole
screen evenly.
To Next Page
Loading...
Need help?
General
