165
SQW0021
Functions for specific subjects and purposes
Setting the profile for a baby or pet to record in a
picture
Recording mode:
You can set a name or birthday of a baby or pet before taking a picture to record the
name or age in months/years in the picture.
■
Setting the name and age in months/years
Set the menu
→ [Rec] → [Profile Setup]
Settings: [ ] ([Baby1]) / [ ] ([Baby2]) / [ ] ([Pet]) / [OFF] / [SET]
Use to select [SET] and then press [MENU/SET]
Use to select [Baby1], [Baby2] or [Pet] and then press [MENU/SET]
Use to select [Age] or [Name] and then press
[MENU/SET]
Use to select [SET] and then press [MENU/SET]
Age: Set birthday with , and press [MENU/SET]
Name: (See “Entering Text”: (→52))
Use to select [Exit] and then press [MENU/SET] to
finish
■
Canceling the display of the name and age in months/years
Select [OFF] in step
.
●
[Age] and [Name] print setting can be made on your computer using “PHOTOfunSTUDIO” on the
supplied DVD. Text may also be stamped onto the still picture using [Text Stamp].
Not available in the following case:
●
You cannot record the name or age in months/years in still pictures that are taken while recording
motion pictures ([
] (motion picture priorities)) (→198).
To Next Page
Loading...
