259
SQW0021
Wi-Fi
Using “LUMIX CLUB”
Acquiring a new login ID ([New account])
1
Set the menu
→ [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB]
2
Select [Set/Add Account]
3
Select [New account]
• Connect to the network. Proceed to the next page by pressing [MENU/SET].
• A confirmation screen will be displayed if a login ID has already been acquired for the camera.
Select [Yes] to acquire a new login ID, or [No] if you do not need to acquire a new login ID.
4
Select the method for connecting to a wireless access point, and set
• For details (→264).
• The settings screen will only appear during the first connection. Connection methods set on this
unit are stored and will be used for subsequent connections. If you want to change the wireless
access point to connect to, press the [DISP.] button, then change the connecting destination.
5
Read through the “LUMIX CLUB” terms of use and press [MENU/SET]
• You can press to switch pages.
• Turn the zoom lever clockwise to enlarge the page display (x2 magnification).
• If you turn the zoom lever counterclockwise after enlarging the page, the page returns to its
original size (no magnification).
• You can use
to move the position of the area to be enlarged.
• Press [
] button to cancel the process without acquiring a login ID.
6
Enter the password
• Enter any combination of 8 to 16 characters and numbers for the password.
• For details on how to enter characters, refer to “Entering Text” (→52).
7
Check the login ID and press [MENU/SET]
• The login ID (12-digit number) will be displayed automatically.
When logging in to the “LUMIX CLUB” with a computer, you only
need to enter the numbers.
• A message is displayed when the connection is complete. Press
[MENU/SET].
• Be sure to make a note of the login ID and password.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
